All Issue

2018 Vol.17, Issue 4 Preview Page

Research Article

Derivation of Flexural Rigidity Formula for Two-row Overlap Pile Wall

2열 겹침주열말뚝의 휨 강성 산정식 유도

Wonhyuk Choi1
,
Bumjoo Kim2*
최 원혁1
,
김 범주2*
1Member, Graduate Student, Department of Civil and Environmental Engineering, Dongguk University, 30 Pildong-ro 1-gil, Jung-gu, Seoul 04620, Republic of Korea
2Member, Professor, Department of Civil and Environmental Engineering, Dongguk University, 30 Pildong-ro 1-gil, Jung-gu, Seoul 04620, Republic of Korea
* Corresponding Author
30 December 2018. pp. 109-118
PDF XML Citation
Abstract

Two-row overlap pile wall, currently under development for use in deep excavations, is a novel retaining structure designed to perform itself as a cutoff wall as well as a high-stiffness wall by constructing four overlapping piles arranged in zigzag manner at a time using a tetra-axis auger. This wall has a relatively complex cross-section, compared with other types of pile wall, which would make it difficult to determine design parameters related to cross-section. In this study, a flexural rigidity equation has been derived by analyzing both theoretically and statistically various wall cross-sections with different pile diameters and overlap lengths. The flexural rigidity equation was found to show the maximum error rate of 3%.

Keywords
Two-row overlap pile wall
Deep excavation
Flexural rigidity
Cross-section

현재 개발 중에 있는 2열 겹침주열말뚝은 대심도 굴착 시 적용을 위해 2열의 말뚝을 통해 강성을 크게 증대시키고 말뚝 간 엇갈림 겹침부를 통한 연속성 확보로 추가의 그라우팅이 없이 차수벽 역할을 할 수 있도록 고안된 흙막이 벽체이다. 이 벽체는 기존의 주열말뚝벽체에 비해 2열 엇갈림 말뚝 시공으로 단면 형상이 복잡하여 기존의 주열말뚝벽체들에 비해 휨 강성 등 단면 조건에 좌우되는 설계인자의 결정이 용이하지 않다. 본 연구에서는 2열 겹침주열말뚝의 다양한 단면 조건들에 대해서 이론적 방법과 통계적 분석을 통해 간단한 단면 제원, 즉, 말뚝의 직경과 말뚝 간 겹침길이를 이용해 흙막이 벽체의 중요 설계 인자인 휨 강성을 간편하게 산정할 수 있는 계산식을 유도하였다. 개발된 간편 휨강성 산정식은 정밀하게 계산된 휨 강성과 비교해 오차율 3% 이하인 것으로 나타났다.

References
1
ACI Committe 318 (2008), Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary (ACI 318R-08), An ACI Standardm American Concrete Institute, Farmington Hills, Michigan 48333-9094, pp.465.
2
Choi, W. H., La, Y. S. and Kim, B. J. (2018), “A Study on Flexural Rigidity of Two-row Overlap Pile Wall for Deep Excavation Support”, Journal of Korean Geosynthetics Society, Vol.17, No.1, pp.33-43.
3
Choi, Y. Y. (2010), Practical Verifications for the Advanced Retaining Walls of Waterproofing and Structural Characteristics, Master’s thesis, Seo-kyeong University.
4
Gere, J. M. and Goodno, B. J. (2013), Mechanics of Materials, 8th Edition, Cengage Learning, Boston, Massachusetts.
5
Hong, S. J. (2012), Performance evaluation of the composite member by PUS system, Master’s thesis, Hanyang University.
6
Jang, S. Y., Choi, J. S., Song, B. W., Choi, Y. Y. and Yoon, J. S. (2012), “Advanced C.I.P Method to Use the Steel-Casing with Inner Joint”, Journal of the Korean Geo-Environmental Society, Vol.13, No.2, pp.95-102.
7
Ministry of Land, Intfrastructure and Transport (2012), Design Standards on Structural Concrete, Ministry of Land, Infrastructure and Transport, Seoul, South Korea, 3.4.3(2), pp.63-64.
8
Lee, H. H. (2012), Flexural Strength of Continuous Wall Constructed by C.I.P System, Master’s thesis, Hanbat University.
9
Mathworks. (2014), MATLAB version 8.0.0.
10
Liao, S. M., Li, W. L., Fan, Y. Y., Sun, X. and Shi, Z. H. (2014), “Model Test on Lateral Loading Performance of Secant Pile Walls”, Journal of Performance of Constructed Facilities, Vol.28, No.2, pp.391-401.
10.1061/(ASCE)CF.1943-5509.0000374
11
Sim, J. U., Son, S. G., Choi, J. S., Yoon, E. J. and Yoon, S. J. (2008), “A Study on Strength and Waterproofing Characteristics of Excellent-Joint Pile(New Cast In Place Pile Method)”, Proc. of the Korean Society of Civil Engineers Conference, Vol.2008, pp.917-920.
12
Won, Y. H., Yoo, J. N., Jeon, B. U. and Yhim, S. S. (2016), “Study for utilizing stiff temporary structure wall to main structure wall”, Proc. of the Korean Society for Railway Conference, pp.1019-1025.
13
Yu, N. J., Lee, K. I., Kim, J. B. and Lee, Y. S. (2018), “For the Development of CS-H Wall using New Material Foundation Study”, Proc. of the Korean Geosynthetics Society Conference, pp.67-68.
Information
  • Publisher :Korean Geosythetics Society
  • Publisher(Ko) :한국지반신소재학회
  • Journal Title :Journal of the Korean Geosynthetics Society
  • Journal Title(Ko) :한국지반신소재학회 논문집
  • Volume : 17
  • No :4
  • Pages :109-118
  • Received Date : 2018-11-19
  • Revised Date : 2018-11-27
  • Accepted Date : 2018-11-28
  • DOI :https://doi.org/10.12814/jkgss.2018.17.4.109
Journal Informaiton Journal of the Korean Geosynthetics Society Journal of the Korean Geosynthetics Society
  • NRF
  • KOFST
  • KISTI Current Status
  • KISTI Cited-by
  • crosscheck
  • orcid
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close