All Issue

2019 Vol.18, Issue 3 Preview Page

September 2019. pp. 101-112
Abstract


References
1 

Choi, S. G. (2013), Development of environment-friendly sand cementation using blast furnace slag and calcite precipitation, Kyungpook National University, Doctor Thesis.

2 

Han, C. G., Kim S. H. and Son, H. J. (2009), Engineering Characteristics Analysis of High Strength Concrete Followed in replacement ratio increase in Blast Furnace Slag, Journal of the Korean Recycled Construction Resources Institute, 7, pp.62-68.

3 

Jang, H. O. and Ji, N. O. (2013), An Experimental Study on the Mixing of Strength and High Fluidity Concrete Using Ground Granulated Blast Furnace Slag, Journal of the Architectural Institute of Korea, 29(6), pp.81-88.

4 

Jeong, J. Y., Jang, S. Y., Choi, Y. C., Jung, S. H. and Kim, S. I. (2015), Effects of Replacement Ratio and Fineness of GGBFS on the Hydration and Pozzolanic Reaction of High-Strength High-Volume GGBFS Blended Cement Pastes, Journal of the Korea Concrete Institute, 27(2), pp.115-125.

5 

Jo, S. G. (2013), An Experimental Study on the Workability and Engineering Properties of Concrete Using Ground Granulated Blast Furnace Slag, Journal of The Society of Convergence Knowledge, 1(1), pp.43-50.

6 

Kim, H. C. (2017), A Study on the development of a grouting material containing blast furnace slag and carbon fiber, Chosun University, Ph. D. Thesis.

7 

Kim, J. H., Han, M. C. and Han, C. G. (2014), Strength Development of the Concrete Incorporating Blast Furnace Slag and Recycled Aggregate as Alkali Activator, Journal of the Korean Recycled Construction Resources Institute, 2(2), pp.107-114.

10.14190/JRCR.2014.2.2.107
8 

Kim, Y. H., Han, C. G. and Lee, H. J. (2013), Effect of Recycled Fine Aggregate Powder and OPC on the Strength Gain Properties of Mortar Using Blast Furnace Slag Powder and Natural Aggregates, Journal of the Architectural Institute of Korea, 29(3), pp.81-88.

9 

Shah, S. P. and Rangan, B. V. (1971), Fiber Reinforced Concrete Prorerties, ACI Materials Journal, 68(2), pp.126-137.

10.14359/11299
10 

Yang, Y. H. (2017), Evaluation of Reinforcement Effect of Grouting using Aramid Fiber, Chosun University, Master Thesis.

Information
  • Publisher :Korean Geosythetics Society
  • Publisher(Ko) :한국지반신소재학회
  • Journal Title :Journal of the Korean Geosynthetics Society
  • Journal Title(Ko) :한국지반신소재학회 논문집
  • Volume : 18
  • No :3
  • Pages :101-112
  • Received Date :2019. 06. 09
  • Revised Date :2019. 09. 24
  • Accepted Date : 2019. 09. 25