All Issue

2019 Vol.18, Issue 3 Preview Page

September 2019. pp. 89-100
Abstract


References
1 

Chatterjee, K., Choudhury, D., Rao, V. D. and Mukherjee, S. P. (2015), “Dynamic Analyses and Field Observations on Piles in Kolkata City”, Geomechanics and Engineering, Vol.8, No.3, pp.415-440.

10.12989/gae.2015.8.3.415
2 

Cho, K. J., Jung, K. G., Song, C. Y. and Park, J. B. (2010), “Evaluation of the Tip Resistance of Prebored PHC Pile on Weathered Rock”, KSCE 2010 Convention, pp.990-993. (in Korean)

3 

Choi, K. C., Moon, Y. H., Oh, W. K. and Chun B. S. (2007). “The Estimation of Bearing Capacity of Auger-drilled Pile in Sand-Gravel by Dynamic Load Test”, 2007 Autumn Conference of The Korean Society for Railway, pp.69-76. (in Korean)

4 

Choi, S. B., Kim, B. I., Han, S. J. and Kim, S. S. (2003), “The Bearing Capacity Evaluation of Pre-Augering Piles”, KSCE 2003 Convention, pp.3348-3353. (in Korean)

5 

Davisson, M. T. (1972), “High Capacity Piles”, Proc. Lecture Series on Innovations in Foundation Construction, ASCE, Illinois Section, Chicago, March 22, pp.81-112.

6 

Davisson, M. T. (1975), “Pile Load Capacity”, Proc. ASEC Conf. Design Construction and Performance of Deep Foundations, ASCE, University of California, Berkeley.

7 

Goble, G. G. and Likins, G. (1996). “On the Application of PDA Dynamic Pile Testing”, In Proceedings of the Fifth International Conference on the Application of Stress-Wave Theory to Piles, pp.263-273.

8 

Hong, J. S., Lee, W. J., Kim, S. H. and Lee, M. W. (1995), “PILE SESSION : Study on a Evaluation of Pile Bearing Capacity using Dynamic Test”, KGS Spring ’95 National Conference, pp.43-44. (in Korean)

9 

Hong, W. P., Chai, S. G. and Han, J. G. (2002), “Skin Friction Capacity of SDA(Separated Doughnut Auger) Pile”, KSCE 2012 Convention, pp.2081-2084. (in Korean)

10 

Hwang, U. S. (2019), “Study on Bearing Capacity of Ultra High Strengh End Extended PHC Pile by Loading Test”, Journal of the Korea Academia-Industrial cooperation Society, Vol.20, No.3, pp.269-275. (in Korean)

11 

Kim, D. G., Park, J. B., Yang, S. J., Kim, T. N. and Lee, D. M. (2017), “High Strength and Ultra High-Strength PHC Pile Test Case with High Design Load”, KSCE 2017 Convention, pp.589-590. (in Korean)

12 

Min, K. H., Park, K. H., Shin, J. H., Park, J. H. and Hwang, U. S. (2013). “Development and Application of Ultra High Strength PHC Pile”, Journal of the Korean Geotechnical Society, Vol.29, No.6, pp.17-21. (in Korean)

13 

MOLIT (1997), Structural Foundation Design Criteria, MOLIT (Ministry of Land, Transport and Maritime Affairs). (in Korean)

14 

MOLIT (2003), Structural Foundation Design Criteria, MOLIT (Ministry of Land, Transport and Maritime Affairs). (in Korean)

15 

MOLIT (2009), Structural Foundation Design Criteria, MOLIT (Ministry of Land, Transport and Maritime Affairs). (in Korean)

16 

Park, J. (2017), “A Comparative Study on the Bearing Capacity of Dynamic Load Test and Static Load Test of PHC Bored Pile”, Journal of the Korean Geo-Environmental Society, Vol.18, No.9, pp.19-31. (in Korean)

17 

Park, J. B. (2004), “Strength and Friction Behavior of Cement paste poured in the Bored Pile”, Journal of the Korean Geo-Environmental Society, Vol.5, No.3, pp.31-39. (in Korean)

10.7843/kgs.2015.31.3.5
18 

Park, J. B. and Kwon, Y. H. (2017), “Realizing Study on the Results of Dynamic Load Test of the Bored Pile”, KSCE 2017 Convention, pp.457-468. (in Korean)

Information
  • Publisher :Korean Geosythetics Society
  • Publisher(Ko) :한국지반신소재학회
  • Journal Title :Journal of the Korean Geosynthetics Society
  • Journal Title(Ko) :한국지반신소재학회 논문집
  • Volume : 18
  • No :3
  • Pages :89-100
  • Received Date :2019. 08. 13
  • Revised Date :2019. 09. 25
  • Accepted Date : 2019. 09. 25