All Issue

2019 Vol.18, Issue 4 Preview Page

Research Article


December 2019. pp. 243-252
Abstract


References
1 

ASTM D 5084 (2016), Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter, ASTM (American Society for Testing and Materials). (In United States of America)

2 

Bang, J. W, Kwon, D. S, Lee, J. H. and Lee, S. O. (2019), “Evaluation of Concrete Properties Depending on Replacement Ratio of Ferronickel Slag Fine Aggregate”, Korea Concrete Institute, Vol.31, No.1 pp.511-512.

3 

Chang, D. I. and Chai, W. K., Son, Y. H. (1992), “Flexural Fatigue Bechavior of Steel Fiber Reinforced Concrete Structures”, Magazine of the Korea Concrete Institute, pp.81-87.

4 

Ecomaister (2012), PS Ball test report.

5 

Hyoseok Co., Ltd. (2015), Ferronickel slag test report.

6 

Korea Concrete Institute (2011), “Development of Concrete Construction Guidelines Using Ferronickel Slag Aggregate Ⅱ”.

7 

Korea Conformity Laboratories (2008), “Development of Ready- mixed Shotcrete for the Economical Recycling of Industrial by-product and the Improvement of Construction Quality”, pp.152-164.

8 

Korea Conformity Laboratories, (2012), Study on Geotechnical Application of Ferro-Nickel-Slag, pp.10-12.

9 

Korea Institute of Civil Engineering and Building Technology (2018), “Develpment of ground deformation minization method for deep and vertical excavation in urban area”, pp.42-47.

10 

Korean Design Standard (2016), KDS 14 20 01, pp.20-21.

10.1055/s-0036-1575012
11 

KS F 2405 (2017), Standard test method for compressive strength of concrete, KSA(Korean Standards Association). (in Korean)

12 

KS F 2408 (2016), Standard test method for flexural strength of concrete, KSA(Korean Standards Association). (in Korean)

13 

KS F 2423 (2016), Standard Test Method for tensile splitting strength of concrete, KSA(Korean Standards Association). (in Korean)

14 

KS F 2502 (2019), Standard test method for sieve analysis of fine and coarse aggregates, KSA (Korean Standards Association). (in Korean)

15 

KS F 2504 (2014), Testing method for density and absorption of fine aggregate, KSA (Korean Standards Association). (in Korean)

16 

KS F 2505 (2017), Standard test method for bulk density and solid contents in aggregates, KSA (Korean Standards Association). (in Korean)

17 

KS F 2515 (2014), Standard test method for chloride content in aggregate, KSA (Korean Standards Association). (in Korean)

18 

KS F 2527 (2018), Concrete aggregate, KSA (Korean Standards Association). (in Korean)

19 

KS F 2566 (2014), Standard Test Method for flexural performance of fiber reinforced concrete Test, KSA (Korean Standards Association). (in Korean)

20 

Kumkang Co., LTD (2017), Steel fiber test report.

21 

Lee, S. H. (2010), A Study on the Development for Utilization of Ferro-Nickel Slag, Sunchon National University Master's thesis, pp.7-10.

22 

Nippon Electric Glass Co., LTD (2001), ARG CHOPPED STRAND SPECIFICATION.

23 

Nycon Material Co., LTD. (2017), Fiber Reinforcement Test report.

24 

Seo, D. M., Kim, Y. U., Kim, T. S., Kim, D. B., Choi, J. H. and Choi, S. J. (2016), “Evaluation of the Flowability and Strength of Mortar by Replacement ratio of Ferro-nickel slag sand”, Korea Concrete Institute, Vol.28 No.1 pp.591-592.

25 

Yu, N. J., Lee, K. I. (2017), “Study on the Performance Evaluation of CS-H Wall composed of Steel Fiber”, J. Korean Geosynthetics Society, Vol.16, No.2, pp.89-96.

Information
  • Publisher :Korean Geosythetics Society
  • Publisher(Ko) :한국지반신소재학회
  • Journal Title :Journal of the Korean Geosynthetics Society
  • Journal Title(Ko) :한국지반신소재학회 논문집
  • Volume : 18
  • No :4
  • Pages :243-252
  • Received Date :2019. 11. 14
  • Revised Date :2019. 12. 17
  • Accepted Date : 2019. 12. 19