ASTM C1583 (2013), Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method), C1583/C1583M-13, West Conshohocken, PA.
ASTM D638 (2010), Standard Test Method for Tensile Properties of Plastics, ASTM International, D638, West Conshohocken, PA.
Bachir, C. B., Benyoucef, B. and Michel, A. (2012). “Experimental measurement of electric conductivity and activation energy in congruent lithium niobate crystal”, Journal of Active and Passive Electronic Devices, Vol.7, pp.261-270.
Bistac, S., Kunemann, P. and Schultz, J. (1998), “Crystalline modifications of ethylene-vinyl acetate copolymers induced by a tensile drawing: effect of the molecular weight”, Polymer, Vol.39, No.20, pp.4875-4881.10.1016/S0032-3861(97)10328-7
BS EN 1542 (1999), Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bound strength by pull-off, British Standards Institution, London (UK).
Calvert, P. D. and Billingham, N. C. (1979), “Loss of additives from polymers: A theoretical model”, Journal of Applied Polymer Science, Vol.24, pp.357-370.10.1002/app.1979.070240205
Cazzuffi, D. (2007), Behaviour of exposed geomembranes in concrete and masonry dams. (in Italian), Presentation at the Second Italian Conference on Dams Engineering, Roma, Academic dei Lincei.
Chang, S-H., Kang, T-H., Choi, S-W., Lee, C., Hwang, G-S. and Choi, M-S. (2016), “An Experiment Study on Fundamental Properties of a Sprayable Waterproofing Membrane”, Tunnel & Underground Space, Vol.26, No.3, pp.220-234. (in Korean)& 10.7474/TUS.2016.26.3.220
Crank, J. (1975), The Mathematics of diffusion, Clarendon Press, Oxford, 2nd Ed.
David, P. K. (1987). “Correlation of Arrhenius parameters: the electrotechnical aging compensation effect”, IEEE transactions on Electrical Insulation, Vol.EI-22, No.2, pp.229-236.10.1109/TEI.1987.298982
EFNARC (2008), Specification and Guidelines on Thin Spray-on Liners for Mining and Tunneling, European Federation of National Associations Representing for Concrete.
Frassine, R. (2005), “Development and experimental validation of a model for the prediction of the long-time behaviour of exposed PVC geomembranes on dams”, Politecnico di Milano, 31 pp. (in Italian)
Gugumus, F. (1989), “Advances in the stabilization of polyolefins”, Polymer Degradation Stabilization, Vol.24, pp. 289-301.10.1016/0141-3910(89)90039-6
Han, S. W., Kwak, S. B. and Choi, N. S. (2014), “Accelerated Life Prediction of Ethylene-Propylene Diene Monomer Rubber Subjected to Combined Degradation”, Trans. Korean Soc. Mech. Eng. A, Vol.38, No.5, pp.505-511.10.3795/KSME-A.2014.38.5.505
Hochstein, M. (1967), “Electrical resistivity measurements on ice sheets”, Journal of Glaciology, Vol.6, No.47, pp.623-633.10.3189/S0022143000019894
Holter, K. G. (2015), Properties of Waterproof Sprayed Concrete Linings, Ph.D. Thesis, Norwegian University of Science and Technology.
Hsuan, Y. G., Schroeder, H. F., Rowe, K., Müller, W., Greenwood, J., Cazzuffi, D. and Koerner, R. M. (2008), “Long-term performance and lifetime prediction of geosynthetics”, In Proceedings of the 4th European Conference on Geosynthetics, Edinburgh, September. Keynote paper.
Hsuan, Y. G. and Guan, Z. (1998), “Antioxidant depletion during thermal oxidation of high density polyethylene geomembranes”, 6th International Conference on Geosynthetics, Atlanta, GA, USA, pp. 375-380.10.1061/(ASCE)1090-0241(1998)124:6(532)
ITAtech (2013), ITAtech design guidance for spray applied waterproofing membranes, ITAtech Activity Group Lining and Waterproofing, ITAtech Report No. 2.
Johnson, R. P., Swallow, F. E. and Psomas, S. (2016), “Structural properties and durability of a sprayed waterproofing membrane for tunnels”, Tunnelling and Underground Space Technology, Vol.60, pp.41-48.10.1016/j.tust.2016.07.013
Koerner, R. M., Lord, A. E. and Hsuan, Y. H. (1992), “Arrhenius modeling to predict geosynthetic degradation”, Geotextiles and Geomembranes, Vol.11, pp.151-183.10.1016/0266-1144(92)90042-9
Lee, K., Kim, D., Chang, S. H., Choi, S. W., Lee, C. (2017), “Analysis of Reinforcement Effect of TSL (Thin Spray-on Liner) as Supports of Tunnel by Numerical Analysis”, Journal of Korean Geosynthetics Society, Vol.16, No.4, pp. 151-161. (in Korean)
Lee, K., Kim, D., Chang, S-H., Choi, S-H., Park, B. and Lee, C. (2018), “Numerical Approach to Assessing the Contact Characteristics of a Polymer-based Waterproof Membrane”, Tunnelling and Underground Space Technology, Vol.79, pp.242-249. (in Korean)10.1016/j.tust.2018.05.015
Morrison, R. T. and Boyd, R. N. (1978), Organic Chemistry, Allyn & Bacon, Boston, pp.50-67.
Petrou, A. L., Roulia, M. and Tampouris, K. (2002). “The use of the Arrhenius equation in the study of deterioration and of cooking of foods some scientific and pedagogic aspects”, Chemistry Education, Research and Practice in Europe, Vol.3, No.1, pp.87-97.10.1039/B1RP90042K
Shi, C. and Day, R. L. (1993). “Acceleration of strength gain of lime-pozzolan cements by thermal activation”, Cement and Concrete Research, Vol.23, pp.824-832.10.1016/0008-8846(93)90036-9
Su, J., Bloodworth, A. (2016), “Interface parameters of composite sprayed concrete linings in soft ground with spray-applied waterproofing”, Tunnelling and Underground Space Technology, Vol.59, pp.170-182.10.1016/j.tust.2016.07.006
Tannant, D. D. (2001), “Thin Spray-on Liners for Underground Rock Support”, Proceedings of the 17th International Mining Congress and Exhibition of Turkey-IMCET 2001, pp.57-73.
Verani, C. A. and Aldrian, W. (2010), Composite linings: ground support and waterproofing through the use of a fully bonded membrane, Shotcrete: Element of a System, Taylor & Francis, London.10.1201/b10545-32
Woo, C-S., Park, H-S., Choi, B-I., Yang, S-C., Jang S-Y. and Kim, E. (2009), “Useful lifetime prediction of rail-pad by using the accelerated heat aging test”, 2009 Conference Proceeding of The Korean Society for Railway, pp.1010-1015. (in Korean)
Yoon, H. K. (2014), “Application of the arrhenius equation in geotechnical engineering”, The Journal of Engineering Geology, Vol.24(4), pp.575-581. (in Korean)10.9720/kseg.2014.4.575
Zweifel, H. (1997), Stabilization of Polymeric Materials, 8, Springer, Berlin, p.122.10.1007/978-3-642-80305-5PMC23795
- Publisher :Korean Geosythetics Society
- Publisher(Ko) :한국지반신소재학회
- Journal Title :Journal of the Korean Geosynthetics Society
- Journal Title(Ko) :한국지반신소재학회 논문집
- Volume : 18
- No :4
- Pages :15-23
- Received Date :2019. 09. 04
- Revised Date :2019. 10. 22
- Accepted Date : 2019. 11. 13