A Study on Engineering Characteristics of the Drilling Fluid Dependingon the Mix Water

Jung-Hyuk Choi; Chung-Sik Yoo; Yun-Su Han

doi:10.12814/jkgss.2016.15.4.043

All Issue

2016 Vol.15, Issue 4 Preview Page Next Page

A Study on Engineering Characteristics of the Drilling Fluid Dependingon the Mix Water 배합수에 따른 안정액의 공학적 특성 분석

30 December 2016. pp. 43-52

PDF XML

Abstract

This paper presents the results of a engineering characteristic to the effect of drilling fluid with different mix designs for use in bore hole collapse prevention. The bore hole collapse prevention mechanism for the bentonite based drilling fluid was first discussed together with the effect of conditioning with different additives on engineering characteristics of bentonite based drilling fluid. As result, bentonite with polymer have a outstanding characteristics as compared to CMC Properties thickening effect In the case of sea water with attatulgite be superior to bentonite. Therefore, in this paper presented qualitative result on the performance of the drilling fluid depending on the water.

Keywords

Drilling fluid

Bentonite

Polymer

Mix design

Bore hole

본 논문에서는 지반 시추 시 공벽붕괴 방지를 위해 사용되는 안정액의 다양한 배합비에 따른 공학적 특성에 대한 실험적 연구를 다루었다. 이를 위해 먼저 배합수가 청수일 경우, 안정액의 공학적 특성을 검토하였으며 아울러 해수 배합시 안정액의 공학적 성능 변화에 대한 공학적 특성을 분석하였다. 그 결과, 청수에서 벤토나이트와 폴리머를 추가할 경우 공학적 성능이 향상되는 것으로 나타났으며, CMC에 비해 Polymer의 증점 효과가 우수한 것으로 검토되다. 또한 해수의 경우 벤토나이트에 비해 내염성점토의 내염성 성능이 우수한 것으로 검토되었다. 따라서 본 논문에서는 시공시 배합수에 따른 안정액을 성능에 대한 정성적인 결과를 제시하였다.

References

1.ASTM D4380 (2001), “Standard Test Method for Density of Bentonitic slurries” American Society for Testing And Materials.

2.ASTM D5890 (2001), “Standard Test Method for Swell index of Clay Mineral Component of Geosynthetic Clay Liners” American Society for Testing And Materials.

3.ASTM D5891 (2010), “"Standard Test Method for Fluid Loss of Clay Componet of Geosynthetic clay Liners”" American Society for Testing And Materials.

4.ASTM D6910 (2004), “"Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries”" American Society for Testing And Materials.

5.Bhattacharya, D (2007), Collapse of soil in pile bore hole and its stabilisa-tion using bentonite suspension, Indian Roads Congress Technical papers 2007, pp.243-252

6.Fritz, P., Hermanns, S. and Heinz, R. (2002), “Modified Bentonite Slurries for slurry Shields in High Permeable Soils”, 4th International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, pp.33-39.

7.Henry, L. B., Filz, G. M. and Davidson, R. R. (1998), Formation and properties of bentonite filter cake, in : Reddi, L. N., Bonala, M.V.S. (Eds.), Filtration and Drainage in Geotechnical and Geoenvironmental engineering, ASCE, GSP 78, pp.69-88.

8.Kwon, Y. H., Jun, S. K., Baek, S. J. and Ariyama, M. (1999), “A study on the mix design for stabilizing liquid of slurry wall”, Korean Concrete Institute Spring Conference, pp.457-462.

9.Lee, I. M., Lee, S. and Cho, K. H. (2004), “Face stability assessment of slurry-shield tunnels concentrating on slurry clogging effect”, Journal of Korean Geotechnical society, Vol.20, No.6 pp.95-107.

10.Lee, J. H. and Kwon, S. Y. (1997), “A study on the mix design of Slurry Wall”, Daelim R&D Center.

11.Nguyen, T. B., Park, M., Lim, J., Choi, H. and Han, S. I. (2011), “Characteristic of Bentonite Filter Cake Vertical Cutoff Walls Evaluated by Modified Fluid Loss Test”, Journal of KGS, Korean Geotechnical Society, February, 2011, Vol.27, No.2, pp.53-62.10.7843/kgs.2011.27.2.053

Information

Publisher :Korean Geosythetics Society
Publisher(Ko) :한국지반신소재학회
Journal Title :Journal of the Korean Geosynthetics Society
Journal Title(Ko) :한국지반신소재학회 논문집
Volume : 15
No :4
Pages :43-52
Received Date : 2016-07-13
Revised Date : 2016-11-22
Accepted Date : 2016-12-09
DOI :https://doi.org/10.12814/jkgss.2016.15.4.043

Journal of the Korean Geosynthetics Society ISSN:2508-2876(Print) 2287-9528(Online) 한국지반신소재학회 논문집

All Issue