All Issue

2014 Vol.13, Issue 4 Preview Page
Modelling and Analysis of Roll-Type Steel Mats for Rapid Stabilization of Permafrost (I) - Modeling -

영구동토 급속안정화를 위한 롤타입강재매트의 모델링과 해석(I)- 해석모델의 수립 -

Do Young Moon1
,
Jae Mo Kang2*
,
Janggeun Lee3
,
Sang Yoon Lee4
,
Goangseuo Zi5
문 도영1
,
강 재모2*
,
이 장근3
,
이 상윤4
,
지 광습5
1Assistant Professor, Dept. of Civil Engineering, Kyungsung Univ.
2Researcher, Korea Institute of Civil Engineering and Building Technology
3Senior Researcher, Korea Institute of Civil Engineering and Building Technology
4Senior Researcher, Korea Institute of Civil Engineering and Building Technology
5Professor, Dept. of Civil Environmental & Architectural Engineering, Korea Univ.
*교신저자. *Corresponding Author. 
30 December 2014. pp. 97-107
PDF XML Citation
Abstract

Finite element modelling and analysis were conducted for the roll-type steel mats which were placed on loose sand and subjected to a standard truck wheel load in this study. The roll-type steel mats mean that the steel mats can be folded as a circle shape for the carrying to fields in cold regions where workability is limited and are developed for a rapid rehabilitation method for roadway across soft ground which is caused by thawing during the summer season in cold regions. The model is composed of link elements to simulate nonlinear behavior of connections between steel mats, thick shell elements to have flexural stiffness of the steel mats, and springs to simulate characteristics of foundation soils. The structural behaviors of the shell, link elements, and springs were verified at each modelling step through experiment and analysis. Beam and shell analysis without the link elements were conducted and compared to results obtained from the model presented in this study. Significant vertical displacement is shown in the shell model with hinge connections. Therefore, the results demonstrate that the analysis model for the roll-type steel mats on loose sand needs further detail parametric studies.

Keywords
Permafrost
Rapid stabilization
Steel mat
Finite element analysis
Modelling

본 논문에서는 표준트럭하중을 받는 연약지반에 놓인 롤타입 강재매트의 모델링과 해석을 수행하였다. 롤 타입 강재매트는 접근성이 제한된 동토지역에서 손쉬운 현장운반을 위해 원형으로 접을 수 있는 강재매트를 의미하며, 동토지반의 융해로 형성되는 연약지반을 통과하는 비포장도로의 급속보강을 위해 개발되었다. 해석 모델은 강재매트 연결부의 비선형적 거동특성을 모사할 수 있는 연결요소, 강재매트의 휨강성을 갖는 쉘요소, 지반특성을 고려한 스프링 구속으로 구성된다. 또한 각 해석요소들의 구조적 거동은 각 모델링 단계에서 실험과 해석을 통해 검증되었다. 링크요소가 없는 빔과 쉘 요소해석이 수행되었으며, 본 연구에서 제시된 해석모델의 결과와 비교하였다. 해석결과, 본 연결부를 고려한 쉘 해석모델의 수직 처짐 결과가 다른 모델에 비하여 상당히 큰 것으로 확인되었다. 따라서, 느슨한 모래지반에 놓인 롤 타입 강재매트의 해석모델은 면밀한 변수해석 연구에 근거하여야 함을 알 수 있다.

References
1
1.Lee, Y. (2003), “Design and Manufacturing of Composite Rigmat for Temporary Road in Development of Oil Fields”, Geotechnical Engineering, Vol.19, No.8, pp.31-37.
2
2.Lee, S., Hong, G., Jo, S. and Sim, Y. (2007), “Design and Manufacturing of Composite Rigmat for Temporary Road in Development of Oil Fields”, Proceedings of KSCE, KSCE, pp.667.
3
3.Lee, J. and Bag, Y., Kim, Y., Han, J., Kang, J., Oh, M. and Kwon, H. (2012), Development of Extreme Cold Region Stabilization Technology(III), KICT Research Report, pp.96-97.
4
4.ABAQUS (2003), Analysis User's Manua(Version 6.4), ABAQUS Inc., USA, 17.4.2-1.
5
5.Chen, S., Aref, J., Chiewanichakorn, M. and Ahn, I. S. (2007), “Proposed Effective Width Criteria for Composite Bridge Girder”, Journal of Bridge Engineering, Vol.12, No.3, pp.325-338.
6
6.Lee, N. H. (2004), “Thermal Buckling Behavior of continuous Welded Rail Track”, Steel Structures, Vol.4, pp.111-119.
7
7.Hammons, M. I. (1998), Advanced Pavement Design : Finite Element Modeling for Rigid Pavement Joints, Report Ⅱ : Model Development, Washington Department of Transportation, 8-2.
8
8.Yen, S. T. and Lee, Y. H. (2007), “Mechanistic analysis of a slab track system and its applications”, The Third Inter-national Conference on Structural Engineering, Mechanics and Computation, Capetown, pp.1-6.
9
9.Zhan, Y. G. (2012), “Modeling Beams on Elastic Foundations Using Plate Elements in finite Element Method”, Electronic Journal of Geotechnical Engineering, Vol.17, pp.2063-2068.
10
10.Eisenmann, G. L. (2000), Feste Fahrbahn fur Schienenbahnen, Sonderdruck aus Benton Kalender, Ernst & Sohn.
11
11.Das, Braja M. (2003), Principles of Foundation Engineering (Fifth Edition), Thomson, pp.223.
Information
  • Publisher :Korean Geosythetics Society
  • Publisher(Ko) :한국지반신소재학회
  • Journal Title :Journal of the Korean Geosynthetics Society
  • Journal Title(Ko) :한국지반신소재학회 논문집
  • Volume : 13
  • No :4
  • Pages :97-107
  • Received Date : 2014-08-29
  • Revised Date : 2014-11-19
  • Accepted Date : 2014-12-04
  • DOI :https://doi.org/10.12814/jkgss.2014.13.4.097
Journal Informaiton Journal of the Korean Geosynthetics Society Journal of the Korean Geosynthetics Society
  • NRF
  • KOFST
  • KISTI Current Status
  • KISTI Cited-by
  • crosscheck
  • orcid
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close